Adams Rite 3090P-01 eForce-150 Prox Keyless Entry Lock

Adams Rite 3090P-01 eForce-150 Prox Keyless Entry Lock

Adams Rite 3090P-01 eForce-150 Prox Keyless Entry Lock
$878.00 $550.00
(You save $328.00)


Adams Rite 3090P-01 eForce-150 Prox Keyless Entry Lock


Description: The eForce® 3090P (Prox) and 3090C (iCLASS) Keyless Entries provide maximum security with either HID® Prox or iCLASS contactless card reader.

Function: The eForce 3090P, 3090C is a hardwired keyless entry control for Adams Rite deadlocks, deadlatches and exit devices, that is compatible with aluminum stile, steel and wood door applications. An authorized card presentation is confirmed with an audible beep and visual change in the red/green LED indicator – displaying the locked/unlocked status. A high-speed motor engages an internal clutch to enable the exterior lever handle operation. Upon timeout, the lever operation is disabled until the next authorized card presentation or key override. The MS Deadlocks must always be relocked manually when used with the eForce 3090P or 3090C eForce Keyless Entry Trim. 

Hardwired installation: 18-22 AWG recommended (seven conductor stranded and shielded). 500 ft maximum distance to host.


• Non-handed with clutched lever protection

• Key override via mortise cylinder ( 1” to 1 ½” length with MS® cam)

• Surface mounted with concealed fasteners ( 1-3/4” to 2-1/4” door thickness)

• Temperature range: -31°F to 151°F (-35°C to 65°C) and 5-95% humidity (non-condensing)


Electrical Specs: eForce 3090P Prox

  • Integrated HID® 125 KHz Prox contactless card reader

  • Interfaces with any Wiegand-compatible access control system

  • Recognizes HID® Prox 26-39 bit formats

  • FCC Part 15 (USA & Canada)

  • 12VDC/150mA average 300mA peak

Electrical Specs: eForce 3090C iCLASS

  • Integrated HID® 13.56 MHz iCLASS Reader

  • Supported credential formats:

     o iCLASS – ISO 15693

     o CSN Read Only:

         MIFARE 14443A

         DESFire – ISO 14443A

         Sony Felica – (ISO 14443C)

  • 12VDC/150mA average 300mA peak

Housing: The sleek-looking 3090 eForce-150 measures 1-3/4” wide x 15-3/8” high, with Satin Chrome (626) and Powdercoat Dark Bronze (121) finishes.

Handle: Clutch-protected cast zinc alloy, finished to match housing, field selectable handing.

Compatible Locking Devices: The 3090 eForce-150 retrofits to Adams Rite MS® Series Deadlocks, 4500 and 4900 Deadlatches and 8000 Series Exit Devices in 31/32” backsets and greater. Additionally, the 3090P/C is compatible with Yale 7200 Series and Corbin Russwin ED4000 Series exit devices (check model number for availability).

Options: Add Cable Extension Kit (12’) 3090-CABLE with connectors to allow for wiring to run from installation site to hub.

Standard Package: Individually boxed with installation instructions, owner’s manual, and mounting hardware for metal door applications from 1-3/4” to 2-1/4” thick.

Product No. Credential Compatible Products Finish
3090 P -01 -626
  125 kHz HID Prox 01 Adams Rite Latches or 8000 Series Exit Devices, Yale 7200 series, Corbin Russwin ED4000 series exit device only 121 To match 313 Dark Bronze Anodized
  13.56 MHz HID iCLASS 02 Adams Rite MS deadlocks 626 Satin Chrome

Cylinder Cam

Operable by any standard 1-5/32"
diameter mortise cylinder with MS
cam dimensioned as shown. Cylinders
with MS cams can be readily obtained
from most cylinder manufacturers.

Compatible Products

This product is compatible with the following products:

Deadlocks: MS1850S (-050), MS1850SN (-050), MS1950 (-050).

Deadlatches: 4500 Series Standard Duty Deadlatch, 4900 Series Heavy Duty Deadlatch.

Exit Devices: Adams Rite 8000 Series Exit Devices in 31/32" backset or greater.

pdficon.pngeForce-150 3090P Catalog Page

pdficon.pngOwner's Manual & Installation Instructions


Customers Also Viewed

Related Products