Accessories

R20470

CEFBB179-54 4-1/2X4 10B Stanley Hardware Electrified Hinge Five Knuckle Concealed Conductor Ball Bearing Architectural Hinge, Steel Full Mortise, Standard Weight, 4-1/2 In. by 4 In., Square Corner, 4 Wire, Dark Oxidized Satin Bronze Oil...

SAR3287 Sargent Electrical Accessories Concealed Actuator Switch Finish: Series: Sargent Electrical Accessories Type: Sensors, Switches, Relays, Timers Sub Type: Electrical Accessories Concealed Actuator Switch

Securitron CCB-8-24 24VDC Control Board Product Features The CCB-8 expansion board is used to add 8 additional Class 2 polyswitch 2A output breakers to BPS Series power supplies larger than 1 Amp. Slide switches connect or disconnect load from power...

Securitron CCB-8-12 12VDC Control Board Product Features The CCB-8 expansion board is used to add 8 additional Class 2 polyswitch 2A output breakers to BPS Series power supplies larger than 1 Amp. Slide switches connect or disconnect load from power...

Securitron LMS-1 Latch Monitor The LM Series is designed for reporting back to an alarm system to indicate that a door is latched, thereby reducing the possibility of false alarms. Can also be used to provide an initiate signal to model XDT delayed...

Securitron LML-2 Double Latch Monitor The LM Series is designed for reporting back to an alarm system to indicate that a door is latched, thereby reducing the possibility of false alarms. Can also be used to provide an initiate signal to model XDT...

Securitron LML-1 Latch Monitor The LM Series is designed for reporting back to an alarm system to indicate that a door is latched, thereby reducing the possibility of false alarms. Can also be used to provide an initiate signal to model XDT delayed...

Securitron MKN2 DPDT Momentary, Narrow Mortise Keyswitch The MK series Mortise Keyswitch Panel permits use of any standard US 1-1/4" or 1-1/8" mortise cylinder to operate a switch. A 1 1/2" cylinder can be used if a spacer ring is added to make it...

Securitron MKN Narrow Mortise Keyswitch The MK series Mortise Keyswitch Panel permits use of any standard US 1-1/4" or 1-1/8" mortise cylinder to operate a switch. A 1 1/2" cylinder can be used if a spacer ring is added to make it protrude 1/4" from...

Securitron MKAN2 DPDT Alternate, Narrow Mortise Keyswitch The MK series Mortise Keyswitch Panel permits use of any standard US 1-1/4" or 1-1/8" mortise cylinder to operate a switch. A 1 1/2" cylinder can be used if a spacer ring is added to make it...

Securitron MKA Alternate, Narrow Mortise Keyswitch The MK series Mortise Keyswitch Panel permits use of any standard US 1-1/4" or 1-1/8" mortise cylinder to operate a switch. A 1 1/2" cylinder can be used if a spacer ring is added to make it protrude...