Falcon K101S/K301S Grade 1 Dane Lever Set


$154.40 - $169.40
SKU:
K101S/K301S
In Stock & Ready To Ship!
Current Stock:Only left:

Description

falcon.png
 
 

The Falcon K Series is tested and certified to ANSI/BHMA Grade 1 standards. When Grade 1 quality and reliability are needed but price is a concern, the certified ANSI/BHMA Grade 1 Falcon K Series can do the job. The Falcon K Series gets back to basics by offering the most common functions, lever styles, and finishes at an affordable price.

A cylindrical lock, also commonly referred to as a bored lock, is a lock in which a large hole is bored into the face of a door and a smaller crossbore hole is bored into the door edge. When purchasing a lock, it is important to consider all of the variables. Outside of the standard considerations such as door type, door thickness, frame size, and backset, it is also important to consider the lock’s application. High traffic, high abuse door openings demand a Grade 1 lock in order to keep doors secure. The Falcon K Series was designed for applications such as interior office doors or busy public restrooms. When quality and reliability are needed but cost is a concern, the certified ANSI/BHMA Grade 1 Falcon K Series can do the job

Features

  • ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
  • UL: UL10C 3 hour A label.
  • Door thickness: Adjustable 1 3⁄8" to 2 1 ⁄4". Comes set for a 1 3⁄4" thick door standard.
  • Backset: 2 3⁄4" standard.
  • Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
  • Attachment: Lock chassis secured to door by threaded mounting screws. Completely preassembled outer trim and inner spindle assembly are through-bolted both through and over chassis using four (4) screws to provide strength and resistance to loosening. Adding rose and lever to inner spindle assembly completes installation.
  • Handing: Locks are non-handed.
  • Cylinders: Drilled with 6-pin chambers, pinned in 5. Cylinder housings and plugs machined from solid brass. Springs are stainless steel. Two nickel silver keys furnished standard.
  • Keyways: “G” keyway standard on conventional cylinders.
  • Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts.
  • Latches: 2 1 ⁄4" x 1 1 ⁄8" square corner with 2 3⁄4" backset comes standard. All latches are UL listed and conform to both beveled and non-beveled doors.
  • Strikes: 4 7 ⁄8" x 1 1 ⁄4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
  • Screws: Furnished with combination screws for use in wood or metal doors and frames.

Specifications

Key-in-lever cylindrical locksets shall be Falcon lock K Series or equal and meet the following requirements: 

  • All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 1 for key-in-lever locksets. 
  • Locksets shall be UL Listed (3 hour A Label). 
  • Locksets shall be provided standard with a clutching lever design. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
  • Lever trim shall have individual torsion springs behind rose for lever return and to prevent lever sag. Trim shall be through bolted with four (4) screws to provide strength and resistance to loosening. Inner and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3 1 ⁄2" diameter. 
  • All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by allen-head set and lever catch to prevent tampering or vandalism. 
  • Locksets shall adjust to fit door thickness from 1 3⁄8" to 2 1 ⁄4". 
  • All locksets shall be non-handed and not require field disassembly for re-handing.
  • Preparation for door must be non-handed. 
  • Cylinders to be secured by a dual retainer. Acceptable manufacturer: Falcon Lock

Models Available

  • K101S- Passage
  • K301S- Privacy

Finish Available

626finish.png

Available Lever Design
Levers are pressure cast (solid levers–no inserts) material finished to match mating parts. Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door.

falconkdane.pngkseries011.png

falconkfunctions.png

Installation Video