Description
Features
- ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
- UL: UL10C 3 hour A label.
- Door thickness: Adjustable 1 3⁄8" to 2 1 ⁄4". Comes set for a 1 3⁄4" thick door standard.
- Backset: 2 3⁄4" standard.
- Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.
- Attachment: Lock chassis secured to door by threaded mounting screws. Completely preassembled outer trim and inner spindle assembly are through-bolted both through and over chassis using four (4) screws to provide strength and resistance to loosening. Adding rose and lever to inner spindle assembly completes installation.
- Handing: Locks are non-handed.
- Cylinder: Small format interchangeable core (SFIC) cylinder (sold separate)
- Keyways: “A” keyway standard on I/C core cylinders
- Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts.
- Latches: 2 1 ⁄4" x 1 1 ⁄8" square corner with 2 3⁄4" backset comes standard. All latches are UL listed and conform to both beveled and non-beveled doors.
- Strikes: 4 7 ⁄8" x 1 1 ⁄4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
- Screws: Furnished with combination screws for use in wood or metal doors and frames.
Specifications
Key-in-lever cylindrical locksets shall be Falcon lock K Series or equal and meet the following requirements:
- All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 1 for key-in-lever locksets.
- Locksets shall be UL Listed (3 hour A Label).
- Locksets shall be provided standard with a clutching lever design. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
- Lever trim shall have individual torsion springs behind rose for lever return and to prevent lever sag. Trim shall be through bolted with four (4) screws to provide strength and resistance to loosening. Inner and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3 1 ⁄2" diameter.
- All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by allen-head set and lever catch to prevent tampering or vandalism.
- Locksets shall adjust to fit door thickness from 1 3⁄8" to 2 1 ⁄4".
- All locksets shall be non-handed and not require field disassembly for re-handing.
- Preparation for door must be non-handed.
- Cylinders to be secured by a dual retainer. Acceptable manufacturer: Falcon Lock
Interchangeable Core (IC) Cylinders (Full Size and Small Format)
For use where fast rekeying by non-technical personnel is desired, conventional interchangeable cores offer a great blend of security and convenience. The special control key for the system is all you need to remove the old core and install a new one. The core itself can be rekeyed with standard Schlage pin kits. Unlike some other brands, Schlage interchangeable cores can always be integrated into existing systems with no adverse effect on the key system. IC locks are especially well-suited to chain stores and restaurants where frequent employee turnover requires immediate rekeying by store management. Use IC cylinders to save time and energy when changing labor-intensive locks on exit devices and other door hardware.
Models Available:
- K511BD - Entry
- K561BD- Classroom
- K581BD- Storeroom
Finish Available
Available Lever Design
Levers are pressure cast (solid levers–no inserts) material finished to match mating parts. Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door.
Installation Video