Norton 5900 Series 5910/5930 Low Energy Power Door Operator

Norton 5900 Series 5910/5930 Low Energy Power Door Operator

Norton 5900 Series 5910/5930 Low Energy Power Door Operator
$3,737.00 $2,249.44
(You save $1,487.56)

nortonlogo.jpg

Norton 5900 Series 5910/5930 Low Energy Power Door Operator

The 5900 Series is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is available for either push- or pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A). “One touch” programming combined with the operators' built-in ability to calibrate door mass, offers Norton customers a smart, dependable solution.

Features

  • Ease of installation and setup
      - Simple instructions
      - "One touch" programming
  • Application versatility and ease of adjustment
      - Non-handed units
      - Push- or pull-side mounting
      - Interfaces with electric hardware
      - Integrates with access control system
  • Operation startup options
      - Wall switches
      - Motion sensor
      - Radio frequency device
      - Push and Go
  • Presence Detector input
  • Sync cable for double doors; synchronizes closing of two operators

Functions

  • Power Assist - when unit is activated, it allows the door to be opened manually with a force less than 5 lbs.
  • Push and Go (selectable) - as the door is manually opened, the operator “senses” movement and opens door to the full-open position.
  • Obstruction Detection
      – Open - door closes if it hits an obstruction while opening
      – Close (Stop on Stall) - door will stop once it hits an obstruction and rest against the obstruction until obstruction is removed
  • Motor Startup Delay - delays operator opening
  • Infinite Hold Open - door will hold open at set position until power is turned off
  • Power Latch (selectable) - increases latch power
  • Selector mode switch (3 position)
      – Off - disables signal inputs
      – On - activates signal inputs
      – Hold Open - activates the unit to the hold open position

Electrical Data

  • Power input 120 VAC, 60 Hz (+10%, -15%)
  • Current draw .75A
  • 12VDC @ .5A output, 24VDC @ .25A output, 24VDC @ .4A output

Certifications

  • UL325 certified
  • UL10c certified
  • Americans with Disabilities Act (ADA)
  • ANSI/BHMA A156.19 certified
  • 2-year limited warranty

Models Available

  • 5910-689: HINGE (PULL) SIDE OF DOOR* 1 – Rigid Arm & Slide Track 110° maximum door swing maximum reveal 1/8" (3mm)
  • 5930-689: STOP (PUSH) SIDE OF DOOR 3 – Standard-Duty Double Lever Arm 110° maximum door swing Reveals 2-3/4" to 5-3/4" (70 to 146mm)

norton5900-1.png

pdficon.pngInstallation Instructions

 

Customers Also Viewed

Related Products

Trustpilot