Description
Sometimes you do not need a complete schlage mortise lockset, most of the times the lever trims, cylinders, thumbturns, mortise lock front armor (faceplate) are in good condition, but the mortise lock body is defective. Here is the solution without having to replace the complete schlage mortise lockset and save some money.
Schlage L9000 Series
Our L9000 Series locks are ideal for use in schools, hospitals and factories, where the finest hardware must also deliver consistent, dependable operation and stand up to constant use and abuse.
Strength and durability
- Fully wrapped heavy-gauge steel case protects against door edge attacks
- All-metal zinc dichromate-plated working parts
- Inside lock case protects electronic components
- Two-piece anti-friction tongue reduces wear and tear
- Outside and inside trim thru-bolted together and through the door
Security built in
- Break-away spindle prevents unsecured failures and provides easy spindle replacement
- Hub blocking plate protects lock against spindle manipulation
- Spring-loaded fusible link provides fail secure mode in case of fire
- Inside lever applied by screwless shank mounting – no exposed trim mount screws
Adaptable to your application
- Universal lock case – ten functions in one case
- Floating mounting tabs automatically adjust to fit a beveled door edge
- Field-reversible handing without opening lock case
- External spring cages allow for simple trim retrofit
- Locking thumbturn on the inside of door visually shows when the door is locked and unlocked
- Lever rotation in both directions (up and down) for ease of use
- Independent lever rotation
Specifications
- Field-reversible without disassembly
- Door thickness: 1-3/4"
- Backset: 2-3/4"
- Case size: 4-7/16" x 6-1/16" x 1"
- Spacing: knob or lever to cylinder 3-7/8", knob or lever to thumbturn hub 2-11/16"
- Bolts: 1" throw stainless steel deadbolt and 3/4" throw stainless steel latch with anti-frictions tongue
- Strike: ANSI curved lip strike 1-1/4" x 4-7/8"
- Cylinder: 6-pin
- UL/CUL listed
Schlage L9485
Faculty/Hotel/Restroom Mortise Lock Body
Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown all keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.
Important notes: This item is sold as Body Only, if you need extra component please check on related products or call us on (347) 868-9554 for more information.
Changing Schlage L9000 Series Mortise lock hand
No more than two simple steps are required to change the hand of any L Series lock. Rotate the latch unit 180° and/or change the catch screw position.
Pull and rotate
Relocate catch screw
A. Changing latchbolt handing
Remove armored front. Pull latchbolt away from chassis and rotate complete unit 180° to reverse the door handing. Reinstall armored front.
B. Change chassis handing
Remove catch screw from one side of chassis and install on opposite side. For RH and RR, the catch screw will be on the lock case side. For LH and LR, the catch screw will be on the lock case cover.
*Catch screw location reversed for Vandlgard function. For first time users, an instructional video is available.
The hand is determined by the direction the door swings when viewed from the exterior or corridor side of the door.