Accessories

The Command Access VDREXKIT-ED is a field request-to-exit (REX) kit designed for Von Duprin 33/35 series exit devices. It sends a signal to your access control panel when someone inside a secured area presses the REX switch, triggering the door release...

Manual Camden's CX-247 is an affordable, compact and easy to program 7 day electronic timer that is designed for use in a wide range of control applications. The unit supports up to 8 'on/off' scheduled times per day. ...

The Securitron DT-7 Prime Time is a 7-day digital timer for controlling electrified door hardware and access control systems. It solves scheduling challenges by automating lock/unlock cycles at programmed times, ideal for facilities needing hands-off...

This lip extension kit adjusts Adams Rite UltraLine 7400 Series electric strikes for doors thicker than standard 1-3/4" or center-hung installations. It solves alignment problems when door thickness or mounting varies from typical flush-mount conditions,...

This 2-inch lip extension kit adapts Adams Rite UltraLine 7400 Series electric strikes for non-standard door installations. It solves alignment issues on center-hung doors, thick doors, or applications where the door does not close flush with the jamb...

Lip Extension Kits for Ultraline 7400 Series Electric Strikes: Lip extensions are for center hung doors, thick doors, or other conditions that vary from the “standard” 1-3/4” thick door that closes flush (or near flush) with the...

The Adams Rite LEK7400-01 is a lip extension kit designed for UltraLine 7400 Series electric strikes on center hung doors, thick doors, or non-standard installations. This 1-1/2" extension adapts the strike to doors that deviate from typical 1-3/4"...

The Camden CX-1002 is a set of L and Z brackets designed for mounting 1200 LB magnetic locks on in-swing doors. These brackets solve installation challenges by providing flexible mounting options that accommodate various door configurations and...

Camden offers a wide variety of mounting brackets and filler plates for CX Series magnetic locks. These accessories are able to support virtually any installation requirement, including the installation, including mounting on...

This top jamb Z bracket assembly is a required mounting component for RCI 8310 electromagnetic locks installed on inward-swinging doors. The bracket kit positions the magnet on the frame and armature plate on the door face, enabling secure...

The RCI TJ71-28 Top Jamb "Z" Bracket is a required accessory for installing RCI 8371 electromagnetic locks on inward-swinging doors. This bracket kit enables proper magnet and armature plate positioning by mounting the magnet to an angle bracket on the...