Description
The Sargent 80 Series exit device is a heavy-duty panic bar solution for metal doors in commercial and institutional facilities. Designed for environments demanding superior durability and security, this rim-mounted device exceeds ANSI/BHMA Grade 1 standards for cycle strength and provides maintenance-free operation with modular construction and minimal moving parts.
This right-hand reverse (RHR) model fits doors 24 to 48 inches wide and mounts to 1.75-inch minimum metal doors. Optional electric features include delayed egress, alarmed exit, remote latch retraction, and photoluminescent guidance. Contact E.D. Locks at sales@edlocks.com or 1-877-207-6067 for expert compatibility verification, rail sizing, and installation guidance from an authorized Sargent dealer.
Specifications
- Model: 1256-WD8610E
- Handing: Right-Hand Reverse (RHR)
- Finish: 32D Stainless Steel
- Door Type: Metal doors, 1.75 inch (44mm) minimum thickness
- Door Width Range: 24 to 48 inches (rails factory-cut to size)
- Minimum Stile Width: 4.5 inches (114mm)
- Device Centerline: 41 inches from finished floor (standard); 38 inches (elementary schools/accessibility)
- Center Case Dimensions: 8.375 inches x 2.625 inches (213mm x 67mm)
- Projection: 3 inches neutral, 2.125 inches depressed
- Top Bolt: Stainless steel
- Strikes: 650 top and 606 bottom (panic and fire-rated)
- Dogging: Hex key standard (cylinder dogging optional)
- Fasteners: Machine screws supplied
- Standards: Exceeds ANSI/BHMA Grade 1
