Description
The Falcon MA621B SN 605 is a commercial mortise lock built for high-traffic office, hospital, and education environments. Its interchangeable core design enables quick re-keying without removing the lock, while the two-piece stainless steel latch and 1-inch dead bolt with saw-resistant rollers deliver dependable security and durability under constant use.
This lock accommodates standard door thicknesses from 1-3/8" to 2-1/2" and features right-hand handing (left-hand optional, field-reversible). As an authorized Allegion dealer, E.D. Locks provides expert guidance on keying options, electrified functions, and installation. Contact sales@edlocks.com or 1-877-207-6067 for personalized support and to verify compatibility with your project requirements.
Specifications
- Door Thickness: 1-3/8" to 2-1/2"
- Backset: 2-3/4"
- Case: Cold formed steel, zinc dichromate plated, 0.090" thick
- Hubs: Hardened steel
- Handing: Right hand standard; left hand optional, reversible in field
- Cylinders: Solid brass, 5, 6, or 7-pin standard; 6 or 7-pin interchangeable core
- Keyways: G keyway (standard cylinder), A keyway (I/C cylinder)
- Latch Bolt: Two-piece stainless steel, 3/4" projection
- Dead Bolt: 1" throw, stainless steel with two 13/16" diameter hardened steel saw-resistant rollers
- Faceplates: 1-1/4" x 8" brass or stainless steel, adjustable for door bevel
- Strike: Brass or stainless steel, meets ANSI A115.1
- Electrified Functions: Available 12 or 24 VDC
- ANSI/BHMA: Meets ANSI/BHMA 156.13, Series 1000
- UL: 3 hour A label
