Description
The Sargent WD8606F is a Grade 1 exit device engineered for metal doors in commercial and institutional buildings. This rim-mounted panic bar delivers the durability and security required for high-traffic environments, with modular construction, minimal maintenance, and proven cycle strength that exceeds ANSI/BHMA standards for long-term reliability.
This left-hand reverse (LHR) model fits 32-inch door widths with standard 41-inch centerline mounting. Compatible with 1 3/4-inch to 2 1/4-inch thick metal doors and supplied with stainless steel fasteners and top strike hardware. Contact E.D. Locks at sales@edlocks.com or 1-877-207-6067 for expert guidance on configuration, keying, and optional features like delayed egress or electric latch retraction.
Specifications
- Brand: Sargent
- Model: WD8606F ETL LHR 32D
- Configuration: Rim-mounted exit device
- Door Width: 32 inches (E Rail, no cutting required)
- Door Thickness: 1 3/4 inch to 2 1/4 inch minimum
- Minimum Stile Width: 4 1/2 inches
- Device Centerline: 41 inches from finished floor (standard)
- Center Case Dimensions: 8 3/8 inch x 2 5/8 inch
- Pushbar Projection (Neutral): 3 inches
- Pushbar Projection (Depressed): 2 1/8 inches
- Maximum Door Opening Height: 96 inches
- Top Bolt: Stainless steel
- Strike Hardware: 650 Top Strike and 606 Bottom Strike (panic and fire rated)
- Dogging: Hex key dogging standard on non-fire-rated devices
- Fasteners: Machine screws supplied standard
- Rating: Exceeds ANSI/BHMA Grade 1
