Description
The Sargent 80 Series WD8606F is a heavy-duty exit device engineered for commercial and institutional buildings requiring superior durability and security throughout their lifespan. Ideal for metal doors 1.75 inches or thicker, this rim-mounted device exceeds ANSI/BHMA Grade 1 standards for cycle and strength. With modular construction and minimal moving parts, it delivers maintenance-free operation and reliable emergency egress control for any facility.
This model features delayed egress capability (57- option), electric latch retraction, and compatibility with 650 top and 606 bottom strike plates. Installation requires 4.5-inch minimum stile width and proper rail selection by door width (E, F, J, or G rails for 24-48 inch openings). As an authorized Sargent dealer, E.D. Locks provides expert specification guidance and genuine parts. Contact our team at sales@edlocks.com or 1-877-207-6067 for assistance selecting the right configuration for your application.
Specifications
- Model: WD8606F ETW LHR 32D
- Series: Sargent 80 Series
- Type: Rim exit device with delayed egress
- Door compatibility: Metal doors, 1.75 inch (44mm) minimum thickness, up to 2.25 inches
- Door width: 32 inch (E Rail, no cutting required)
- Minimum stile width: 4.5 inches (114mm)
- Maximum door opening height: 96 inches
- Standard centerline height: 41 inches (1041mm) from finished floor
- Center case dimensions: 8.375 inches (213mm) x 2.625 inches (67mm)
- Pushbar projection (neutral): 3 inches (76mm)
- Pushbar projection (depressed): 2.125 inches (54mm)
- Top bolt: Stainless steel
- Strikes: 650 top strike and 606 bottom strike (panic and fire-rated)
- Dogging: Hex key dogging standard (non fire-rated); cylinder dogging available
- Standards: Exceeds ANSI/BHMA Grade 1
- Electric options available: Alarm, beacon, photoluminescent coating, illuminated touchpad, latchbolt monitor, lever monitoring, request-to-exit signal, remote latch retraction, electric dogging, electroguard
