Y581LD ELI 626 Falcon Lock Cylindrical Lock

• Door Thickness: Y Series locksets accommodate door thicknesses of 1-3/8” to 1-3/4”.
• Backsets: Universal 2-3/8” — 2-3/4” UL Listed label latch is standard.
• Mechanism: Cold rolled steel, zinc plated and chromate coated for rust resistance.
• Attachment: Outside knob/lever, rose and chassis one single assembly. Inner mechanism secured to outer mechanism with two through-bolt screws through a steel mounting plate. Snap-on inner rose conceals screw heads. Knob/lever mounts over knob/ lever retainer.
• Handing: Non-handed. May be used in right hand or left hand doors swinging in or out.
• Cylinders: Furnished with solid brass plug and housing, drilled with 6-pin chambers, pinned in 5 unless otherwise specified. Hana and Elite knobs and Dane levers available with 6 or 7-pin small format interchangeable cores. Furnished with two nickel silver keys standard.
• Keyways: ”G” keyway standard on standard cylinders. ”A” keyway standard on I/C core cylinders. Available with some optional keyways.
• Trim: Available with Hana and Elite knob styles and Dane and Quantum lever handle styles.
• Latches: 1/2” bolt projection. UL standard. Furnished standard with a universal 2-3/8” – 2-3/4” backset with a 1-1/8” x 2-1/4” faceplate. Optional 1-1/8” x 2-1/4” square or round corner latch front available.
• Strikes: 2-3/4” x 1-1/8” T-strike standard. ANSI 4-7/8” x 1-1/4” or 2-1/4” full lip strikes available. Consult Options and Accessories section.
• Screws: Furnished with combination wood/machine screws for use on wood or metal doors or frames.
• ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 2. 1-1/2 hour B label doors.

Falcon Finishes Chart