Description
Function Designed to fit within very narrow stile sliding door stiles without compromising the high degree of security needed by these doors. The stainless steel bolt has three unusual features: Adjustability: A full 4.6mm lengthening or shortening of bolt projection can be made by turning an exposed screw in the face of the lock. This can compensate for a considerable misalignment between door and jamb. Self Protection: If the door is closed with the bolt in the locked position, the bolt will retract immediately on contact with the jamb, preventing damage or lock-out. Anti-Lifting: The 3-ply laminated stainless steel hookbolt is designed to withstand approximately 1⁄2 ton of force vertically or horizontally, thus protecting against jamb/door attack. The MS®1848 can be operated by a standard bored type cylinder, with three hub slot positions allowing installation even where jamb and stile design provides severely limited turn clearance.
Specifications
- A compact lock to fit within very narrow sliding door stiles without compromising in any way the high degree of security needed
- A full 3/16" lengthening or shortening of bolt projection is possible by turning an exposed screw in the face of the lock
- If the door is closed with the bolt in locked position the bolt will retract immediately on contact with the jamb preventing damage or accidental lock-out
- Can be operated by a standard cylinder so the glass door may be keyed-in with other types of doors
- Three hub slot positions allow installation even where jamb and stile design provides severely limited turn clearance
- 3-ply laminated stainless steel bolt
- Designed to withstand approximately one-half ton force, either horizontally or vertical
- Case: Stainless steel 1/2" x 3-3/16" x 1-1/8"
- 45 degree hub angle
