Von Duprin RX3327AEO Exit Device, 3in, US28

Grade 1 Surface Vertical Rod Exit Device, Narrow Stile Pushpad, 36", Exit Only, Less Trim, Hex Key Dogging, Request to Exit, Satin Aluminum Clear Anodized Finish, Non-Handed

MSRP: $3,803.00
$2,529.05
You save $1,273.95
SKU:
RX3327AEO 3 US28
In Stock & Ready To Ship!
Current Stock:Only left:

Description

The Von Duprin RX3327AEO is a UL-listed panic exit device designed for single and double doors in commercial buildings. This Grade 1 ANSI A156.3-2008 certified hardware provides reliable emergency egress with a grooved mechanism case and deadlocking anti-friction bolts, ideal for high-traffic facilities requiring code-compliant life safety solutions.

The RX3327AEO accommodates doors from 2 feet 4 inches to 4 feet wide and mounts at standard 39 13/16 inches above finished floor. Vertical rods with 1/2 inch square tubing support doors up to 7 feet, with extension options available. Contact our authorized dealer team at sales@edlocks.com or 1-877-207-6067 for expert guidance on trim selection, keying, and installation to ensure optimal performance and code compliance.

Specifications

  • Brand: Von Duprin
  • Model: RX3327AEO 3 US28
  • Device Type: Surface Vertical Rod Exit Device
  • Certification: UL Listed, ANSI A156.3-2008 Grade 1
  • Door Width Range: 2 feet 4 inches to 4 feet (660 mm to 1219 mm)
  • Device Centerline Height: 39 13/16 inches (1006 mm) from finished floor
  • Center Case Dimensions: 8 13/16 inches x 2 13/32 inches x 1 9/16 inches (208 mm x 62 mm x 40 mm)
  • Mechanism Case Dimensions: 2 1/4 inches x 2 1/4 inches (57 mm x 57 mm)
  • Latch Bolt: Deadlocking anti-friction, 5/8 inch (16 mm) throw
  • Vertical Rods: 1/2 inch square tubing, standard for 7 foot doors
  • Top Rod Length: 34 15/16 inches (887 mm)
  • Bottom Rod Length: 31 1/4 inches (794 mm)
  • Pushbar Projection Neutral: 3 13/16 inches (97 mm)
  • Pushbar Projection Depressed: 3 1/16 inches (78 mm)
  • Extension Rods Available: 1 foot (205 mm) or 3 feet (914 mm) for doors over 7 feet
  • Door Undercut: 1/4 inch (7 mm)
  • Fasteners: #425 SNB for wood and metal doors, #325 SNB for end case and exit-only applications