Description
The Sargent 80 Series WD8606J is a heavy-duty exit device engineered for commercial and institutional facilities demanding maximum durability and security. Built to exceed ANSI/BHMA Grade 1 standards, this left-hand reverse rim-mounted device features modular construction with minimal moving parts, delivering maintenance-free operation and reliable egress control across metal doors 1-3/4 inch or thicker.
The WD8606J is factory-configured for 37 to 42 inch door widths with the J-rail pre-cut to 42 inches. Compatible with 650 top and 606 bottom strikes, it supports optional electric features including delayed egress, alarmed exit, and remote latch retraction. As an authorized Sargent dealer, E.D. Locks provides expert guidance on rail sizing, electric options, and installation. Contact our sales team at sales@edlocks.com or 1-877-207-6067 for technical support and custom configurations.
Specifications
- Series: 80 Series
- Model: WD8606J
- Configuration: Rim, Left-Hand Reverse
- Rail: J-Rail (37-42 inch door widths, pre-cut to 42 inches)
- Door Thickness: 1-3/4 inch minimum (up to 2-1/4 inch with specification)
- Minimum Stile Width: 4-1/2 inches
- Strike: 650 Top & 606 Bottom (panic and fire-rated)
- Center Case Dimensions: 8-3/8 inch wide x 2-5/8 inch deep
- Pushbar Projection (Neutral): 3 inches
- Pushbar Projection (Depressed): 2-1/8 inches
- Device Centerline Height: 41 inches from finished floor (38 inches for elementary schools with auxiliary control)
- Maximum Door Height: 96 inches (HC and WS options)
- Maximum Door Opening: 120 inches
- Top Bolt: Stainless steel
- Dogging: Hex key dogging standard (cylinder dogging available)
- Fasteners: Machine screws supplied standard
- Grade: ANSI/BHMA Grade 1
