Description
The Sargent 80 Series WD8673J-12V is a heavy-duty exit device engineered for commercial buildings requiring ANSI/BHMA Grade 1 certified security and reliability. Ideal for metal doors 1.75 inches thick or greater, this rim-mounted device features a pushbar mechanism with electric touchpad, remote latch retraction, and delay egress capability. Modular construction and minimal moving parts ensure maintenance-free operation throughout the building's lifecycle.
This model accommodates door widths up to 48 inches with factory-cut J rails and includes stainless steel top bolt, 650 top strike, and 606 bottom strike. Installation requires 4.5-inch minimum stile width and 41-inch centerline mounting height. As an authorized Sargent dealer, E.D. Locks provides expert configuration guidance, compatibility verification, and technical support at sales@edlocks.com or 1-877-207-6067 to ensure correct specification for your application.
Specifications
- Brand: Sargent
- Model: WD8673J-12V ETB RHR 32D
- Configuration: Rim, Exit Trim Bar with Electric Touchpad, Remote Latch Retraction, Right-Hand Reverse
- Door Types: Metal doors 1.75 inches (44mm) minimum thickness, up to 2.25 inches with specification
- Door Widths: 37 inches to 42 inches (J rail, no cutting required for 42 inch)
- Minimum Stile Width: 4.5 inches (114mm)
- Device Centerline Height: 41 inches (1041mm) standard; 38 inches (965mm) for elementary schools
- Maximum Door Height: 96 inches
- Center Case Dimensions: 8.375 inches x 2.625 inches (213mm x 67mm)
- Pushbar Projection: 3 inches (76mm) neutral, 2.125 inches (54mm) depressed
- Top Bolt: Stainless steel
- Strikes: 650 top, 606 bottom (panic and fire rated)
- Dogging: Hex key standard on non-fire rated; cylinder dogging available
- Standards: Exceeds ANSI/BHMA Grade 1 cycle and strength requirements
