Description
The Sargent 80 Series WD8674J is a heavy-duty exit device engineered for commercial and institutional facilities demanding reliable, long-lasting security. Built to exceed ANSI/BHMA Grade 1 standards, this rim-mounted panic bar suits metal doors 1.75 inches minimum thickness and accommodates door widths from 24 to 48 inches via four rail sizes. Ideal for architects and facility managers prioritizing durability and low maintenance.
This right-hand reverse (RHR) model arrives with stainless steel hardware, standard hex key dogging, and 12V capability for optional electric features including delayed egress, alarms, and latch monitoring. Rail sizes are factory-cut to specification when door width is supplied. As an authorized Sargent dealer, E.D. Locks offers expert sizing guidance and seamless integration support. Contact sales@edlocks.com or call 1-877-207-6067 for configuration assistance.
Specifications
- Model: WD8674J-12V ETP RHR 32D
- Series: Sargent 80
- Configuration: Rim-mounted, right-hand reverse
- Door Thickness: 1.75 inches minimum; up to 2.25 inches with specification
- Door Width Rails: E (24-32 inches), F (33-36 inches), J (37-42 inches), G (43-48 inches)
- Stile Width: 4.5 inches minimum
- Device Centerline: 41 inches standard (38 inches for elementary schools with auxiliary control)
- Max Door Height: 96 inches
- Center Case: 8.375 inches x 2.625 inches
- Pushbar Projection: 3 inches neutral, 2.125 inches depressed
- Top Bolt: Stainless steel
- Standards: Exceeds ANSI/BHMA Grade 1
- Dogging: Hex key standard (cylinder dogging optional)
- Voltage: 12V
- Optional Features: Alarm, beacon, photoluminescent coating, illuminated touchpad, latchbolt monitor, lever monitoring, request-to-exit signal, remote latch retraction, delay egress, electric dogging
