Description
The Sargent 80 Series exit device is a Grade 1 panic hardware solution for metal doors in commercial and institutional buildings. Built for durability and low maintenance, it features modular construction with minimal moving parts and exceeds ANSI/BHMA requirements for cycle strength. Ideal for facilities requiring reliable emergency egress hardware that will perform throughout the building's lifetime.
This rim-mounted device fits metal doors 1 3/4 inches minimum thickness and accepts E, F, J, or G rails depending on door width. Available with multiple electric options including alarm, latch monitoring, delayed egress, and remote latch retraction. Contact an authorized Sargent dealer at 1-877-207-6067 or sales@edlocks.com for configuration assistance, compatibility verification, and expert guidance on your specific installation requirements.
Specifications
- Model: 56-WD8646G ETJ RHR 32D
- Series: 80 Series
- Configuration: Rim-mounted, Right Hand Reverse
- Door Types: Metal doors, 1 3/4 inch minimum thickness, up to 2 1/4 inch with specification
- Minimum Stile Width: 4 1/2 inches
- Standard Rail Options: E (24-32 inch doors), F (33-36 inch doors), J (37-42 inch doors), G (43-48 inch doors)
- Strike: 650 Top Strike and 606 Bottom Strike (panic and fire rated)
- Device Centerline: 41 inches from finished floor (38 inches for elementary schools with 100 Series Auxiliary Control)
- Center Case Dimensions: 8 3/8 inches x 2 5/8 inches
- Pushbar Projection: 3 inches neutral, 2 1/8 inches depressed
- Top Bolt: Stainless steel
- Dogging: Hex key standard (cylinder dogging available)
- Standards: ANSI/BHMA Grade 1
