Adams Rite 1877 Cylinder Operated Flushbolt For Wood Application
Description: Designed for greater key control, the 1877 Cylinder-Operated Flushbolt prevents accidental locking of the inactive leaf of paired wood doors. May be installed to lock at threshold or at header.
Function: Designed for use instead of conventional flip-lever operated flushbolts, the 1877 Cylinder-Operated Flushbolt gives building management key control of the inactive leaf of paired doors. Prevents casual locking of the inactive leaf by children or other unauthorized persons. Uses same basic over-center action mechanism as MS® pivoted bolt locks. Recommended for installation at both top and bottom of inactive door with MS1837 in active door for greatest security. May be installed to lock at threshold or header.
Operation: 360° turn of key throws or retracts the hex-section bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Accepts any standard 1-5/32” mortise cylinder from either or both sides. Cylinder must have MS® dimensioned cam.
Cylinder Backset: 1-1/4” only
Cylinder Height: Standard length (cylinder center to door edge) is 13-1/2". Other lengths available by special order.
Case: Measures 1” x 6” x 1-29/32”. Steel with corrosion-resistant plating.
Bolt: Hexagonal 3/8” flat to flat, with 11/16” throw. Made of stainless steel.
Strike: 2-1/4" x 15/16" strike is supplied.
Armored Faceplate: 1-1/4” x 15-5/8”. Finish: US28 Clear Anodized (628).
Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS for cylinder make, thumbturn and trim ring information.
Standard Package: Basic lock mechanism boxed with actuator arm attached, rod/bolt assembly unattached. Stainless steel bolt guide, mounting screws, and installation instructions included. Cylinders available separately.